55HPRO UNIFOREST LOG SKIDDING WINCH

55HPRO UNIFOREST LOG SKIDDING WINCH

Specifications: 55HPRO UNIFOREST LOG SKIDDING WINCH

The 55Hpro hydraulic log skidding winch with a pulling force of 12,100lbs makes it easy to use due to the unwinding device and functions AUTO STOP and SMART 3in1. The work is done via control console or remote control. A foldable window guard makes transport easier. A recognizable winch design with a durable construction and a compact butt plate prevents wear and makes it easy to work with. The 55H model has no unwinding device.

 

Smart 3in1

 

(1) When pulling logs with a tractor, you may encounter some obstacles on the road (hill, roots etc.). If the tractor is not able to overcome these obstacles, the unwinding function can be switched into the mode without the assistance of the unwinding device, and you can continue driving with a tight wire rope between the winch and the load. (2) The unwinding device can be turned on and off without delay (the standard model has a 1.5-sec. delay). (3) The SMART 3in1 function ensures additional tension of the wire rope between the unwinding pulley and drum.

 

Unwinding device and Auto Stop

 

To make the wire rope unwinding easier you can choose a winch with an integrated unwinding device. This type of winch also guarantees a constant tension of the wire rope between the unwinding pulley and the drum, thus preventing damage to the drum or pulley and enabling a longer service life.

 

Auto Stop function (limit switch) automatically stops the function of winding the wire rope on the drum. This function prevents mechanical damages of the unwinding device, entanglement, and wire rope damages.

 

  1. Electromagnetic globe valves (no leaks or pressure losses).
  2. Hydraulic components (tank, cylinders…) are galvanic anticorrosion protected.
  3. Pump driven through gear drive.
  4. All hydraulic components are fitted into the winches framework and therefore protected from damage and weather events.
  5. Three-plates clutch from thick sheet metal, therefore there is no tear in the boreholes.
  6. Safety pin to keep the wire rope from falling out at the lower pulley.
  7. The lower pulley attached using a magnet.
  8. Devise for unwinding wire rope is available.
  9. Drive elements that are exposed to stress and wear are thermally treated (mended and induction hardened).
  10. Sealed bearings no lube required.
  11. More built-in compartments for chains and other equipment.
  12. Chainsaw scabbard and pix axe holder.
  13. Trailer coupler storage on winch frame so that it can be put away when not in use but still with the unit.
  14. Fold down safety screen so the unit can be placed in storage with low overhead clearance.

 

Uniforest Skidding Winch 45Hpro

  • Tractive Force Lower Cable Position
    12,100lbs
  • Power Required HP
    45-80
  • Wireless Remote
    Yes
  • Standard Cable
    230′ x 7/16
  • Middle Speed of Cable ft/sec
    3 ft/sec
  • Weight
    870lbs
  • Blade Width ft
    5.2ft
  • Front to Back
    1.6 ft
  • Winch Height
    4.7ft
  • Overall Height
    6.6 ft
  • Category
    1 & 2

ORDER NOW

55HPRO UNIFOREST LOG SKIDDING WINCH

$12,495.00

Add to cart

OPTIONS